The UT pump features a vortex (eddy flow) structure and wide pump casing interior, preventing clogging by waste and solid matter.
| Model | Colour code curve | Discharge bore mm | Phases | Motor output kW | Head max. m | Capacity max. l/min | Max. solid handling ø mm | |
|---|---|---|---|---|---|---|---|---|
| free standing | with guide rail fitting | |||||||
| 40UT2.25 | optional |
1
|
40 | 3 | 0,25 | 6,5 | 230 | 35 |
| 40UT2.25S | optional | 40 | 1 | 0,25 | 6,5 | 230 | 35 | |
| 50UT2.4 | optional |
2
|
50 | 3 | 0,4 | 9,0 | 270 | 35 |
| 50UT2.4S | optional | 50 | 1 | 0,4 | 9,0 | 270 | 35 | |
| 50UT2.75 | optional |
3
|
50 | 3 | 0,75 | 12,5 | 440 | 35 |
| 50UT2.75S | optional | 50 | 1 | 0,75 | 12,5 | 440 | 35 | |
| Discharge bore mm | 40 |
| Phases | 3 |
| Motor output kW | 0,25 |
| Head max. m | 6,5 |
| Capacity max. l/min | 230 |
| Max. solid handling ø mm | 35 |
| Discharge bore mm | 40 |
| Phases | 1 |
| Motor output kW | 0,25 |
| Head max. m | 6,5 |
| Capacity max. l/min | 230 |
| Max. solid handling ø mm | 35 |
| Discharge bore mm | 50 |
| Phases | 3 |
| Motor output kW | 0,4 |
| Head max. m | 9,0 |
| Capacity max. l/min | 270 |
| Max. solid handling ø mm | 35 |
| Discharge bore mm | 50 |
| Phases | 1 |
| Motor output kW | 0,4 |
| Head max. m | 9,0 |
| Capacity max. l/min | 270 |
| Max. solid handling ø mm | 35 |
| Discharge bore mm | 50 |
| Phases | 3 |
| Motor output kW | 0,75 |
| Head max. m | 12,5 |
| Capacity max. l/min | 440 |
| Max. solid handling ø mm | 35 |
| Discharge bore mm | 50 |
| Phases | 1 |
| Motor output kW | 0,75 |
| Head max. m | 12,5 |
| Capacity max. l/min | 440 |
| Max. solid handling ø mm | 35 |
| ø Discharge bore mm | 40mm, 50mm |
| Discharge Connection | Inside thread, JIS10K flange |
| Optional Accessories | Guide rail fitting "TOK" for small pumps |
| Impeller | Vortex impeller |
| Shaft Seal | Double mechanical seal |
| Bearings | Shielded ball bearings |
| Impeller | Plastic |
| Casing | Grey iron casting EN-GJL-200 |
| Shaft Seal | Silicon carbide in oil bath |
| Temperature | 0-40°C |
| Type of Fluid | Municipal sewage, water with solids |
| Lubrication | Turbine oil (ISO VG32) |
| Motor Protector (built-in) | Circle thermal cut-out |
| Type, Poles | Induction motor, 2 poles, IP68 |
| Insulation | Insulation class E |
| Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l., Single phase 230V / 50Hz |
| Casing | Grey iron casting EN-GJL-150 |
| Shaft | Stainless steel EN-X6Cr13 |
| Cable | Rubber, NSSHÖU, Rubber, 10m H07RN-F |
| Model | A | A4 | B | D | H | W1 | W2 |
|---|---|---|---|---|---|---|---|
| 40UT2.25 | 239 | 205 | 101 | 161 | 350 | 110 | 300 |
| 40UT2.25S | 239 | 205 | 101 | 161 | 350 | 110 | 300 |
| 50UT2.4 | 242 | 205 | 101 | 161 | 350 | 110 | 300 |
| 50UT2.4S | 242 | 205 | 101 | 161 | 350 | 110 | 300 |
| 50UT2.75 | 242 | 205 | 101 | 161 | 406 | 110 | 350 |
| 50UT2.75S | 242 | 205 | 101 | 161 | 406 | 110 | 350 |
The UT-series is an economical type submersible vortex pump designed for handling raw sewage and wastewater from domestic and commercial areas.
Rotation of the impeller produces vortex flow in the pump casing, which allows solid matters and fibrous materials to be pumped out with minimum contact to the impeller. Since this mechanism does not require those foreign matters to pass through the impeller vane, the pump offers practically unchokable pumping.
