Reduced energy consumption sewage pumps with IE3 motors. Equipped as standard with oil chamber sensors and cooling jackets for wet and dry installation. Its anti blockage design includes a big free passage and a vortex impeller.
| Model | Colour code curve | Discharge bore mm | Phases | Motor output kW | Head max. m | Capacity max. l/min | Max. solid handling ø mm | ATEX available | |
|---|---|---|---|---|---|---|---|---|---|
| free standing | with guide rail fitting | ||||||||
| 100UPZM43.7 | TOS100UPZM43.7 |
1
|
100 | 3 | 3,7 | 10,8 | 2000 | 100 | Yes |
| 80UPZM42.9LL | TOS80UPZM42.9LL |
2
|
80 | 3 | 2,9 | 8,4 | 1005 | 80 | |
| 100UPZM45.0 | TOS100UPZM45.0 |
3
|
100 | 3 | 5,0 | 12,7 | 2433 | 100 | Yes |
| 100UPZM46.5 | TOS100UPZM46.5 |
4
|
100 | 3 | 6,5 | 14,3 | 2917 | 100 | Yes |
| 100UPZM48.5 | TOS100UPZM48.5 |
5
|
100 | 3 | 8,5 | 16,3 | 3050 | 100 | Yes |
| 80UPZM45.0 | TOS80UPZM45.0 |
6
|
80 | 3 | 5,0 | 14,7 | 1967 | 80 | Yes |
| 80UPZM42.9L | TOS80UPZM42.9L |
7
|
80 | 3 | 2,9 | 10,8 | 1333 | 80 | Yes |
| 80UPZM46.5 | TOS80UPZM46.5 |
8
|
80 | 3 | 6,5 | 17,2 | 2217 | 80 | Yes |
| 80UPZM42.9 | TOS80UPZM42.9 |
9
|
80 | 3 | 2,9 | 12,8 | 1550 | 80 | Yes |
| 80UPZM43.7H | TOS80UPZM43.7H |
10
|
80 | 3 | 3,7 | 14,7 | 1413 | 80 | Yes |
| Discharge bore mm | 100 |
| Phases | 3 |
| Motor output kW | 3,7 |
| Head max. m | 10,8 |
| Capacity max. l/min | 2000 |
| Max. solid handling ø mm | 100 |
| ATEX available | Yes |
| Discharge bore mm | 80 |
| Phases | 3 |
| Motor output kW | 2,9 |
| Head max. m | 8,4 |
| Capacity max. l/min | 1005 |
| Max. solid handling ø mm | 80 |
| Discharge bore mm | 100 |
| Phases | 3 |
| Motor output kW | 5,0 |
| Head max. m | 12,7 |
| Capacity max. l/min | 2433 |
| Max. solid handling ø mm | 100 |
| ATEX available | Yes |
| Discharge bore mm | 100 |
| Phases | 3 |
| Motor output kW | 6,5 |
| Head max. m | 14,3 |
| Capacity max. l/min | 2917 |
| Max. solid handling ø mm | 100 |
| ATEX available | Yes |
| Discharge bore mm | 100 |
| Phases | 3 |
| Motor output kW | 8,5 |
| Head max. m | 16,3 |
| Capacity max. l/min | 3050 |
| Max. solid handling ø mm | 100 |
| ATEX available | Yes |
| Discharge bore mm | 80 |
| Phases | 3 |
| Motor output kW | 5,0 |
| Head max. m | 14,7 |
| Capacity max. l/min | 1967 |
| Max. solid handling ø mm | 80 |
| ATEX available | Yes |
| Discharge bore mm | 80 |
| Phases | 3 |
| Motor output kW | 2,9 |
| Head max. m | 10,8 |
| Capacity max. l/min | 1333 |
| Max. solid handling ø mm | 80 |
| ATEX available | Yes |
| Discharge bore mm | 80 |
| Phases | 3 |
| Motor output kW | 6,5 |
| Head max. m | 17,2 |
| Capacity max. l/min | 2217 |
| Max. solid handling ø mm | 80 |
| ATEX available | Yes |
| Discharge bore mm | 80 |
| Phases | 3 |
| Motor output kW | 2,9 |
| Head max. m | 12,8 |
| Capacity max. l/min | 1550 |
| Max. solid handling ø mm | 80 |
| ATEX available | Yes |
| Discharge bore mm | 80 |
| Phases | 3 |
| Motor output kW | 3,7 |
| Head max. m | 14,7 |
| Capacity max. l/min | 1413 |
| Max. solid handling ø mm | 80 |
| ATEX available | Yes |
| ø Discharge bore mm | 100mm, 80mm |
| Discharge Connection | Flange DIN/ANSI DN100 (PN10), Flange DIN/ANSI DN80 (PN10) |
| Optional Accessories | Guide rail fitting "TOS" (guide support, duck foot bend, lifting chain) / Bend and stand set for free standing types |
| Impeller | Vortex impeller |
| Shaft Seal | Double mechanical seal |
| Bearings | Shielded ball bearings |
| Impeller | Grey iron casting EN-GJL-250 |
| Casing | Grey iron casting EN-GJL-250 |
| Shaft Seal | SiC, upper in oil bath |
| Wearring | Bronze |
| Temperature | 0-40°C |
| Type of Fluid | Municipal sewage |
| Lubrication | Turbine oil (ISO VG32) |
| Motor Protector (built-in) | Miniature protector |
| Type, Poles | Induction motor, 4 poles, IP68 |
| Insulation | Insulation class H |
| Phase / Voltage | 3-phase / 400V / 50Hz / s.d., 3-phase / 400V / 50Hz / d.o.l. |
| Casing | Grey iron casting EN-GJL-250 |
| Shaft | Stainless steel EN-X14CrMoS17 |
| Cable | Rubber, 10m H07RN8-F |
| Model | A | B | B1 | C | C1 | DN1 | DN2 | DN3 | G | H | J1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 100UPZM43.7 | 751 | 410 | 250 | 310 | 155 | 100 | 100 | 100 | 395 | 627 | 122 |
| 80UPZM42.9LL | 722 | 375 | 220 | 310 | 155 | 80 | 100 | 3 | 395 | 598 | 137 |
| 100UPZM45.0 | 751 | 460 | 280 | 336 | 168 | 100 | 100 | 100 | 395 | 627 | 122 |
| 100UPZM46.5 | 821 | 460 | 280 | 336 | 168 | 100 | 100 | 100 | 395 | 627 | 122 |
| 100UPZM48.5 | 821 | 460 | 280 | 336 | 168 | 100 | 100 | 100 | 395 | 657 | 122 |
| 80UPZM45.0 | 722 | 408 | 250 | 316 | 158 | 80 | 100 | 80 | 395 | 628 | 137 |
| 80UPZM42.9L | 722 | 408 | 250 | 316 | 158 | 80 | 100 | 80 | 395 | 628 | 137 |
| 80UPZM46.5 | 792 | 408 | 250 | 316 | 158 | 80 | 100 | 80 | 395 | 628 | 137 |
| 80UPZM42.9 | 722 | 408 | 250 | 316 | 158 | 80 | 100 | 80 | 395 | 628 | 137 |
| 80UPZM43.7H | 722 | 408 | 250 | 316 | 158 | 80 | 100 | 80 | 395 | 628 | 137 |
| Model | A | B | B1 | C | C1 | D | DN1 | DN2 | E |
|---|---|---|---|---|---|---|---|---|---|
| 100UPZM43.7 | 751 | 410 | 250 | 310 | 155 | 834 | 100 | 100 | 140 |
| 80UPZM42.9LL | 722 | 375 | 220 | 310 | 155 | 742 | 80 | 100 | 112 |
| 100UPZM45.0 | 751 | 460 | 280 | 336 | 168 | 884 | 100 | 100 | 140 |
| 100UPZM46.5 | 821 | 460 | 280 | 336 | 168 | 884 | 100 | 100 | 140 |
| 100UPZM48.5 | 821 | 460 | 280 | 336 | 168 | 884 | 100 | 100 | 140 |
| 80UPZM45.0 | 722 | 408 | 250 | 316 | 158 | 775 | 80 | 100 | 112 |
| 80UPZM42.9L | 722 | 408 | 250 | 316 | 158 | 775 | 80 | 100 | 112 |
| 80UPZM46.5 | 792 | 408 | 250 | 316 | 158 | 775 | 80 | 100 | 112 |
| 80UPZM42.9 | 722 | 408 | 250 | 316 | 158 | 775 | 80 | 100 | 112 |
| 80UPZM43.7H | 722 | 408 | 250 | 316 | 158 | 775 | 80 | 100 | 112 |
The UPZM series provides all the benefits of non clogging hydraulics equipped with vortex impellers while allowing for higher efficiencies thanks to IE3 motors equipped. A newly developed cooling jacket allows for dry and wet installations.
