Portable three-phase slurry pumps, in lightweight aluminium. Its built-in agitator stirs sand, silt & pulverized solids into suspension for pumping.
| Model | Colour code curve | ø Discharge bore mm | Type of Fluid | Max. Solid Handling mm | Max. dry matter % | Max. PH Value | Max. Capacity l/min | Max. Head m | Motor output kW | Phase / Voltage |
|---|---|---|---|---|---|---|---|---|---|---|
| KTV2-50 |
1
|
50 | Sand/Slurry | 8.50 | 10 | 5-9 | 420 | 20 | 2,0 | 3-phase / 400V / 50Hz |
| KTV2-80 |
2
|
80 | Sand/Slurry | 8.50 | 10 | 5-9 | 720 | 22.50 | 3,0 | 3-phase / 400V / 50Hz |
| ø Discharge bore mm | 50 |
| Type of Fluid | Sand/Slurry |
| Max. Solid Handling mm | 8.50 |
| Max. dry matter % | 10 |
| Max. PH Value | 5-9 |
| Max. Capacity l/min | 420 |
| Max. Head m | 20 |
| Motor output kW | 2,0 |
| Phase / Voltage | 3-phase / 400V / 50Hz |
| ø Discharge bore mm | 80 |
| Type of Fluid | Sand/Slurry |
| Max. Solid Handling mm | 8.50 |
| Max. dry matter % | 10 |
| Max. PH Value | 5-9 |
| Max. Capacity l/min | 720 |
| Max. Head m | 22.50 |
| Motor output kW | 3,0 |
| Phase / Voltage | 3-phase / 400V / 50Hz |
| ø Discharge bore mm | 50 - 80 |
|---|---|
| Discharge Connection | Threaded flange/Hose coupling |
| Type of Fluid | Sand/Slurry |
|---|---|
| Temperature | 0-40°C |
| Max. Solid Handling mm | 8.50 |
| Max. dry matter % | 10 |
| Max. PH Value | 5-9 |
| Max. Capacity l/min | 420 - 720 |
| Max. Head m | 20 - 22.50 |
| Impeller | Semi-Vortex impeller |
|---|---|
| Bearings | Shielded ball bearings |
| Mechanical Seal | Dual mechancial seal in oil bath |
| Impeller | Chromium iron casting |
|---|---|
| Agitator | FCD700 (EN-GJS-700-2) |
| Casing | Synthetic rubber |
| Pump Body | Cast Aluminium |
| Mechanical Seal | Silicon Carbide |
| Motor output kW | 2,0 - 3,0 |
|---|---|
| Starting method | direct online |
| Type, Poles | Induction motor, 2 poles, IP68 |
| Insulation | Insulation class E |
| Phase / Voltage | 3-phase / 400V / 50Hz |
| r.p.m. | 2870 - 2875 |
| Motor Protector (built-in) | Circle thermal cut-out |
| Rated Current | 3.80 - 6.10 |
| Frame | Aluminium alloy casting |
|---|---|
| Shaft | Stainless steel EN-X6Cr13 |
| Cable | NSSHÖU 4C*1.5mm² |
| Cable Length | 20m |
| Dry Weight Kg | 25 - 38 |
|---|---|
| Pressure Resistance | max. 50m |
| Model | A | A1 | B | B1 | D | H | W1 |
|---|---|---|---|---|---|---|---|
| KTV2-50 | 250 | 192 | 450 | 368 | 250 | 454 | 120 |
| KTV2-80 | 295 | 216 | 550 | 427 | 295 | 550 | 130 |
The KTV2-series of slurry-handling type is a submersible three-phase portable slurry pump. It is equipped with an agitator that assists smooth suction of settled matters. Though the pump is a three-phase unit, it is designed to weigh lighter for portability, yet it can be used for pumping slurry. The pump parts such as the impeller and the pump casing are made of wear-resistant materials. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air. The slim design allows the pump to be placed in a confined space.
