HSD

HSD | 1-phase / 50Hz
Request an Offer

A lightweight & robust single-phase drainage pump with agitator. A chromium iron impeller minimizes clogging & increases wear resistance when pumping sludge & bentonite. A high-performance motor enables long periods of operation while partially submerged.

Technical Data
  • ø Discharge bore mm: 50
  • Type of Fluid: Sand/Slurry
  • Max. Solid Handling mm: 9
  • Max. dry matter %: 15
  • Max. PH Value: 5-9
  • Max. Capacity l/min: 220
  • Max. Head m: 13.20
  • Motor output kW: 0,55
  • Phase / Voltage: 1-phase / 230V / 110V / 50Hz
Performance curve
1 O
Specifications
Model Colour code curve ø Discharge bore mm Type of Fluid Max. Solid Handling mm Max. dry matter % Max. PH Value Max. Capacity l/min Max. Head m Motor output kW Phase / Voltage
HSD2.55S
1
50 Sand/Slurry 9 15 5-9 220 13.20 0,55 1-phase / 230V / 110V / 50Hz
ø Discharge bore mm 50
Type of Fluid Sand/Slurry
Max. Solid Handling mm 9
Max. dry matter % 15
Max. PH Value 5-9
Max. Capacity l/min 220
Max. Head m 13.20
Motor output kW 0,55
Phase / Voltage 1-phase / 230V / 110V / 50Hz
General
ø Discharge bore mm 50
Discharge Connection Threaded flange/Hose coupling
Pumping Fluid
Type of Fluid Sand/Slurry
Temperature 0-40°C
Max. Solid Handling mm 9
Max. dry matter % 15
Max. PH Value 5-9
Max. Capacity l/min 220
Max. Head m 13.20
Pump
Components
Impeller Semi-Vortex impeller
Bearings Shielded ball bearings
Mechanical Seal Dual mechancial seal in oil bath
Material
Impeller Chromium iron casting
Agitator Chromium iron casting
Casing Ductile iron casting EN-GJS-700-2
Pump Body Cast Aluminium
Mechanical Seal Silicon Carbide
Motor
Motor output kW 0,55
Starting method condensor
Type, Poles Induction motor, 2 poles, IP68
Insulation Insulation class E
Phase / Voltage 1-phase / 230V / 110V / 50Hz
r.p.m. 2810
Motor Protector (built-in) Circle thermal cut-out
Rated Current 3.40
Material
Frame Aluminium alloy casting
Shaft Stainless steel EN-X6Cr13
Cable H07RN8-F 3C*1.0mm²
Cable Length 10m
Others
Dry Weight Kg 14
Pressure Resistance max. 20m
Dimensions - in mm
W1: lowest running water level
  • HSD2.55S
ModelAA1BB1DHW1d
HSD2.55S2412001719718642110550

The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase unit, it has the durability equivalent to three-phase slurry pumps, since the wear parts are made of abrasion-resistant materials.

Automatic model with pendant float set is available.

Oil Leakage Sensor TSS-TEG-08
TSS Seal Oil Sensor M8 (10m)
Externally mounted leak sensors for water detection inside of oil chamber. Please note, an additional relay e.g. finder needs to be installed.
Motor Protection Plugs 56104000tu
Motor Protecton Plug 230V w/z hand-automatic (on-off)
Specifications
Amperage Control 4,0A
Cable Gland 2 x M16
IP 44
switch: OFF-ON (0-I) protection 4A 2x cable glands M16, for use of external float switch Overload Protection: Automatically disconnects the motor in case of excessive current draw, preventing overheating and damage.
Cable repair set 061-TEG-05
Cable Repair Kit for 001-012-44 Cabtyre Cable Set (10m) H07RN8
Cable repair set which allows you to repair a broken cable on site by yourself.