Single-phase drainage pump for tool hire & flood defence. Pumps water down to 1mm & known as a "puddle sucker". An added feature, an integral check valve, stops backflow of water from hose, retaining priming water for pumping to occur quickly.
| Discharge bore mm | 25 |
| Phases | 1 |
| Motor output kW | 0,48 |
| Head max. m | 11,0 |
| Capacity max. l/min | 170 |
| Max. solid handling ø mm | 6 |
| Discharge bore mm | 25 |
| Phases | 1 |
| Motor output kW | 0,48 |
| Head max. m | 11,0 |
| Capacity max. l/min | 170 |
| Max. solid handling ø mm | 6 |
| Discharge bore mm | 50 |
| Phases | 1 |
| Motor output kW | 0,75 |
| Head max. m | 15,0 |
| Capacity max. l/min | 228 |
| Max. solid handling ø mm | 6 |
| Discharge bore mm | 50 |
| Phases | 1 |
| Motor output kW | 0,75 |
| Head max. m | 15,0 |
| Capacity max. l/min | 228 |
| Max. solid handling ø mm | 6 |
| ø Discharge bore mm | 25, 50 |
| Discharge Connection | Hose coupling |
| Impeller | Semi-Vortex impeller |
| Shaft Seal | Double mechanical seal |
| Bearings | Shielded ball bearings |
| Impeller | Urethane rubber |
| Casing | Ethylene propylene rubber |
| Suction Plate | Steelplate+Urethane rubber |
| Shaft Seal | Silicon carbide in oil bath |
| Type of Fluid | Cleaning water, Water on floor, Puddles |
| Temperature | 0-40°C |
| Type, Poles | Induction motor, 2 poles, IP68 |
| Insulation | Insulation class E |
| Phase / Voltage | Single phase 230V / 110V / 50Hz |
| Motor Protector (built-in) | Miniature protector |
| Lubrication | Turbine oil (ISO VG32) |
| Casing | Aluminium die casting |
| Shaft | Stainless steel EN-X6Cr13 |
| Cable | Rubber, 10m H07RN8-F |
| Model | A | A1 | B | H | d |
|---|---|---|---|---|---|
| LSC1.4S | 196 | 168 | 316 | 258 | 25 |
| LSCE1.4S | - | - | - | - | - |
| LSC2.75S | 197 | 167 | 357 | 313 | 50 |
| LSCE2.75S | 197 | 167 | 357 | 313 | 50 |
The LSC pump is a submersible single-phase portable residue drainage pump. The specially designed bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve that prevents reverse-flow of the sucked water when the pump stops its operation. The rubber lined base plate protects the floor surface from scratching. The top discharge, flow-thru design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability. The discharge direction is selectable between vertical and inclined, which prevents folding or bending of the discharge hose.
Automatic model with electrode sensor is available.
