Direkt zum Inhalt | Direkt zur Navigation
Jesteś tutaj:

February 2021

When the going gets tough

Soil grouting is a challenge for water pumps

If the soil body on a construction site is to be consolidated, high-pressure injection is often used. This is a procedure that requires the removal of a large amount of cement suspension - which quickly causes many pumps to fail.

This was the experience of a construction crew in Cologne, Germany, who wanted to use the soil grouting method to grout the floor. They relied on cantilever pumps to remove the liquid residues. This was a wise decision, because such pumps are quite suitable for swampy applications with high solids content and low immersion depths. In special civil engineering, however, they quickly reach their limits. In the case described, the pumps lasted only a few weeks. The highly abrasive pumping medium was so hard on them that a more economical solution had to be found.

In the process, also known as jetting, the soil is mixed with a binding agent, usually a cement suspension, under high pressure until a solidified soil mass is produced. It is used for deep foundations, underpinning or sealing bases for sheet piles. At several hundred bars of pressure, the self-hardening binder shoots out of the drill pipe into the working area. Loosened soil pushes to the surface with the excess cement suspension and must be removed. The resulting volume is considerable and amounts to several times the worked soil space.

Download

Cement suspensions on a construction site in Cologne, Germany: long service lives are possible with heavy sand pumps such as those from Tsurumi (Photo: Tsurumi)
W celu uzyskania dodatkowych informacji proszę się skontaktować z:
Sz.P. Birger Schmidt, Marketing
Tsurumi (Europa) GmbH
Wahlerstr. 10
40472 Düsseldorf
Niemcy
Tel.: +49 211 417 9373
Faks: +49 211 479 1429
e-mail: sales@tsurumi.eu

Firma Tsurumi to jeden z najbardziej doświadczonych producentów pomp na świecie. W swojej nowoczesnej fabryce w Kioto firma Tsurumi globalnie produkuje rocznie więcej pomp zatapialnych niż którykolwiek z pozostałych producentów pomp. W ofercie Tsurumi znajduje się obecnie ponad 1800 różnych modeli pomp, w tym semi-vortex, vortex, z mechanizmem zgarniającym, z mechanizmem tnącym, dla odwadniania budowlanego, oczyszczania ścieków, aeratory i dmuchawy, urządzenia dekantacyjne oraz odprowadzające pianę. Firma Tsurumi działa na całym świecie w ramach rozległej sieci sprzedawców w Europie, Północnej i Południowej Ameryce, Azji, Australii oraz niektórych częściach Afryki.
www.tsurumi.eu