Direkt zum Inhalt | Direkt zur Navigation
Sei qui:

July 2021

New Ram guard makes pumps safer

Dewatering pumps

The pump manufacturer Tsurumi now offers an impact cover that protects the build-in water level sensor even in the event of massive force.

The installation is very simple: loosen the two screws of the sensor, put on the protective cover and fasten the screws. From now on, the sensor is protected from external damage. After all, impact destruction is always possible, even with careful handling or during unattended pump operation.

The sensor on Tsurumi pumps, e.g. on the KTVE and KTZE series, comes by no means unprotected: Its flexible rubber bend absorbs shocks quite effectively - but only to a certain extent. In order to guarantee protection even in the event of violent impact, Tsurumi has developed the conical ram protection cover made of solid sheet steel. This practically rules out mechanical damage to the sensor, according to the manufacturer.

Sensor pumps are popular because they allow the device to control itself: if the water rises to a certain level, the unit starts up - and switches off again when the level drops. This also saves operating costs. The ram protection safeguards this function.

By the way, unlike other suppliers, Tsurumi relies on electrodes to measure the water level. This approach is potentially much more fail-safe because it does not require mechanics. Electrodes also react faster and are usually more accurate.

Of course, every measuring instrument is vulnerable. In this respect, the recommendation to pump operators is to install the low-cost ram protection. The manufacturer has not yet stated whether this cover will become standard for new pumps. More information can be found at Tsurumi.eu or on YouTube, where an installation video is available.

Download

Definitely recommended: Retrofittable ram protection for the level sensor of wastewater pumps (Photo: Tsurumi)
Per maggiori informazioni, contattare:
Birger Schmidt, marketing
Tsurumi (Europe) GmbH
Wahlerstr. 10
40472 Düsseldorf
Germania
Tel: +49 211 417 9373
Fax: +49 211 479 1429
E-mail: sales@tsurumi.eu

Tsurumi è uno dei produttori di pompe con maggiore esperienza al mondo. Nella moderna sede di Kyoto, la produzione annua globale di pompe a immersione di Tsurumi è superiore a quella di qualsiasi altro produttore di pompe. La gamma Tsurumi attualmente include più di 1800 diversi modelli di pompe: a semi-vortice, a vortice, anti-ostruzione, fresatura, per cantieristica e drenaggio, per acque nere e reflue, per aeratori e soffiatori, per unità di decantazione e skimmer per rimozione della schiuma. Tsurumi opera su scala mondiale grazie all'ampia rete di rivenditori in Europa, America del Nord e del Sud, Asia, Australia e alcune zone dell'Africa.
www.tsurumi.eu