Direkt zum Inhalt | Direkt zur Navigation
You are here:

June 2017

TRNs purify waste water

Drinktec 2017 – Pumps for environmental protection and water logistics

Tsurumi's TRN submerged aerators mix the tank and add large quantities of oxygen. "This technology does not require membrane jets which means it cannot become blocked," product manager Carsten Bode reiterates. This makes it highly interesting for breweries, producers of mineral water and dairies as it allows them to satisfy the discharge limits.


"TRN submerged aerators work along the same principle as submersible pumps, however they move air, not water. This means they are practically fail proof even if used permanently," says Carsten Bode. The oxygen bubbles required for the biological preclarification phase are generated by means of rotation. Almost as a side effect, the content of the tank is kept in motion to prevent sediments forming. The fans do not require a compressor, nor do they need to be attached to the structure because they are simply lowered onto the base of the tank. Only a power cable, suction line and retaining chain are required. The shape of the tank is also irrelevant.


If several fans are used, the clarification process runs without interruption should one unit need to be removed. There are ten models with motor outputs ranging from 0.75 to 40 kW in the product range. The TRN adds up to 600 m³ air per hour. It is also well suited for expanding capacity levels or as a backup for existing systems. It is also possible to use the unit together with aerators from other manufacturers.


Titanium pumps for difficult media


As a result of its expertise as the world's largest construction pump manufacturer, Tsurumi will also be presenting numerous waste water pumps; for instance the new GY for fibrous, coagulating media. It is equipped with a multi-blade impeller and cutting device. The combination of stationary cutting ring and rotating blade is so efficient that cable cross-sections of 2 inch and upwards are sufficient. It will also be presenting special pumps made of rustproof steel (PU series) or titanium (TM series) for initial pumping of chemically aggressive media, and also LSC flat suction units that can even suction up puddles.


Users appreciate the durability and maintenance-friendly character of the 'Tsurumis'. The manufacturer also provides extensive support on site. The company strives to offer the best service in the industry. For more information, please visit the Tsurumi.eu website.

Download

In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. With regards to the above application wear and tear can take place mainly in impeller, agitator, suction plate, shaft sleeve, oil ring, mechanical seal, pump casing, strainer, motor casing and discharge coupling. Depending on the working conditions the lifetime of those parts might vary significantly and can be shorter than the legal warranty period.
In this regard, please pay attention to our general terms and conditions that we also send to you by mail on request.
For further information please contact:
Mr. Birger Schmidt, Marketing
Tsurumi (Europe) GmbH
Wahlerstr. 10
40472 Düsseldorf
Germany
Tel: +49 211 417 9373
Fax: +49 211 479 1429
e-mail: sales@tsurumi.eu

Tsurumi is one of the world's most experienced pump manufacturers. From its modern facility in Kyoto, Tsurumi produces more submersible pumps globally per year than any other pump manufacturer. There are currently over 1800 different pump models in the Tsurumi range, including semi-vortex, vortex, non-clog, cutter, contractor & dewatering, sewage & wastewater, aerators & blowers, decanting units and scum skimmers. Tsurumi operates on a worldwide basis with an extensive dealer network in Europe, North and South America, Asia, Australia and parts of Africa.
www.tsurumi.eu