Distributor Search

In the Gorges du Verdon, one of France's most famous gorges, an ambitious construction project is currently underway: a 250-metre bypass is being built to secure a tunnel. Before excavation could even begin, a major challenge had to be overcome — the diversion of an impressive 180,000 cubic metres of water.
The team from Tsurumi France took on this demanding task with precision and determination. Over the course of a week, the team prepared the site by lowering three series of Tsurumi pumps 22 metres below ground level, installing pipes for horizontal water drainage (with a 21-metre height difference), setting up settling basins, and completing all electrical connections.
On Tuesday, 3 September, at 8:30 a.m., the pumps were started:
One GSZ, two KRD and three LH models, each designed for extreme operating conditions, worked continuously and reliably until Thursday, 5 September, at 1:30 a.m. By that time, 90,000 cubic metres of water had already been successfully pumped out — the remainder drained away naturally by gravity.
This impressive operation once again demonstrates the reliability, strength and endurance of Tsurumi pumps – even under the toughest environmental conditions.
Would you like to learn more about our high-performance pumps, made in Japan?
Contact us at sales@tsurumi.eu
#Tsurumi #WaterManagement #ConstructionPower #MadeInJapan #PumpingPerformance #EngineeringInAction #TunnelConstruction #stronger4longer

#Tsurumi #WaterManagement #ConstructionPower #MadeInJapan #PumpingPerformance #EngineeringInAction #TunnelConstruction #stronger4longer

Even under the most extreme and unpleasant conditions, Tsurumi pumps prove their strength and reliability time and again. Designed for challenging environments, our pumps continue to perform where others fail – whether in construction, tunneling, or wastewater applications.
Equipped with cutting wheels and shredding mechanisms, selected Tsurumi models are built to handle even the toughest materials. They ensure uninterrupted operation and outstanding durability, even in the harshest surroundings.
This Halloween season, we're celebrating the fearless spirit of Tsurumi – powerful, relentless, and always ready to take on the next challenge.
Because when the job gets dark and dirty, Tsurumi gets stronger.
#Stronger4Longer #Halloween #HappyHalloween #MonsterPump

#Stronger4Longer #Halloween #HappyHalloween #MonsterPump

At Tsurumi, the commitment to delivering exceptional pump quality "Made in Japan" is deeply rooted in every stage of development. To maintain and continuously prove this standard, all new pumps and prototypes undergo rigorous testing procedures before being released to the market.
Each model is examined in detail through comprehensive performance, motor, thermal, seal, and durability tests. These evaluations are carried out in advanced in-house facilities, including ventilation tanks, performance testers, and thermal testing systems.
To ensure objective verification, Tsurumi also works closely with independent experts from universities, research institutes, and certification bodies. This collaborative approach guarantees that every Tsurumi pump meets the highest technical and safety standards.
In addition to continuous internal testing, the company is investing further in its testing infrastructure to achieve both optimal pump performance and the required solids permeability for demanding applications. Thanks to state-of-the-art 3D printing technology, test-ready prototypes can now be produced in a very short time — significantly accelerating the development process.
With these efforts, Tsurumi reinforces its position as one of the global leaders in reliable and durable pumping solutions, ensuring that every product lives up to its promise: #Stronger4longer.
For more information or technical advice, please contact our team at: sales@tsurumi.eu

#Stronger4longer

Tsurumi has taken another important step toward sustainability and climate protection by installing a large-scale photovoltaic (PV) system at its manufacturing facility in Kyoto, Japan.
The new solar installation consists of 1,430 modules with a total output of approximately 844 kW. It generates around 810,000 kWh of electricity per year, covering roughly 15.3% of the plant's annual energy requirements. By utilizing this clean energy, the factory will reduce its CO₂ emissions by over 340 tonnes annually.
A key feature of the system is its integrated battery storage unit, which provides backup power during outages and serves as an emergency power source.
With this investment, Tsurumi reinforces its commitment to sustainable manufacturing, energy efficiency, and environmental responsibility. The project is part of the company's broader initiative to minimize its ecological footprint and expand the use of renewable energy across all operations.
#Tsurumi #Sustainability #RenewableEnergy #SolarPower #GreenManufacturing #CleanEnergy #ClimateAction #EngineeringForTheFuture #PVSystem #Stronger4Longer

#Tsurumi #Sustainability #RenewableEnergy #SolarPower #GreenManufacturing #CleanEnergy #ClimateAction #EngineeringForTheFuture #PVSystem #Stronger4Longer

You can meet our French colleagues from Tsurumi France from Tuesday to Friday, 7-10 October, at a very important trade fair in Lyon: At Pollutec in Hall 6, Stand C090, an unusual programme awaits you: Every lunchtime, we invite you to an exclusive gastronomic event – a delicious break in the middle of the trade fair!
And every afternoon, you can experience pure action at the workshop on installing and removing #Tsurumi pumps. As a reward, you will receive an aperitif set!
In addition to culinary discoveries and technical challenges, the Tsurumi stand at #Pollutec is of course the place to find out about powerful pump models.
From Thursday to Saturday, 9–11 October, we look forward to welcoming you to the Tiefbau LIVE fair in Karlsruhe!
At stand F348 in area P3 of #TiefbauLIVE, Tsurumi will be showcasing a wide range of pumps in three areas:
- Powerful 230V pumps for civil engineering – ideal for dirty water, sludge and residual water on construction sites. Here, visitors can experience the LSC2.75 in wet live operation, among other things. Also on display are the LBA, HSA, HSD and NK series, as well as the robust 50 UTA2.75 for tough solid admixtures.
- Applications for buildings, basements and properties. Among other things, the super-compact Family series, a cutaway model of the POMA and the PNI will be on display here. A petrol-powered TEM-25H ensures self-sufficient operation, while our LSC flat suction pump with flange connection will be demonstrated in operation as a complete system.
- 400V pumps for demanding applications in infrastructure construction, building maintenance and special civil engineering. Tsurumi will be showcasing the powerful KTZ, KTVE and KTD. The technical highlight will be the powerful GPN3-80 agitator pump, presented as a sophisticated cutaway model – a real eye-catcher for anyone interested in technology.
Come to Lyon and Karlsruhe! We will bring you up to date on the latest developments in pumps for tough applications.
#stronger4longer

#Tsurumi #Pollutec #TiefbauLIVE #stronger4longer