Original residue dewatering pump capable of pumping down to floor level. Even the smallest puddle can be pumped dry. Ideal for complete drainage of flat surfaces where a sump is not available: rooftops, parking lots, garages, roadways, pools,...
You are here:
- Start >
- Suomi >
- Construction Dewatering >
- Tunnel Constructions >
- LSC
LSC | 1-phase / 50Hz
| Model | Colour code curve | Bore mm | Motor output kW | Rated current A | Head max. m | Capacity max. l/min | Dry weight kg w/o cable | Max. solid handling ø mm | Pressure resistance max. m | Cable length m |
|---|---|---|---|---|---|---|---|---|---|---|
| LSC1.4S | 25 | 0,48 | 2,9 | 11,0 | 170 | 12,0 | 6 | 10 | 10 | |
| LSCE1.4S | 25 | 0,48 | 2,9 | 11,0 | 170 | 12,6 | 6 | 10 | 10 |
LSC1.4S_1.pdf
| ø Discharge bore mm | 25 | |||
|---|---|---|---|---|
| Pumping Fluid | Temperature | 0-40°C | ||
| Type of Fluid | Cleaning water, Water on floor, Puddles | |||
| Pump | Compo- nents | Impeller | Semi-Vortex impeller | |
| Shaft Seal | Double mechanical seal | |||
| Bearings | Shielded ball bearings | |||
| Material | Impeller | Urethane rubber | ||
| Casing | Ethylene propylene rubber | |||
| Suction Plate | Steelplate+Urethane rubber | |||
| Shaft Seal | Silicon carbide in oil bath | |||
| Motor | Type, Poles | Induction motor, 2 poles, IP68 | ||
| Lubrication | Turbine oil (ISO VG32) | |||
| Motor Protector (built-in) | Miniature protector | |||
| Insulation | Insulation class E | |||
| Phase / Voltage | Single phase 230V / 110V / 50Hz | |||
| Material | Casing | Aluminium die casting | ||
| Shaft | Stainless steel EN-X6Cr13 | |||
| Cable | Rubber, H07RN-F | |||
| Discharge Connection | Hose coupling | |||
Dimensions in mm:
-
-
- LSC1.4S
-
-
- LSCE1.4S
W1: lowest running water level
| Model |
|---|
| LSC1.4S |
| LSCE1.4S |
In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website
www.tsurumi.eu/english/applications.htm.
