You are here:

LH-W | 3-phase / 50Hz

The recent developments of civil engineering and architectural technologies are increasing the necessity of digging deeper into the earth. This requires a submersible pump with a rugged construction that can withstand the high pressure so deep in the water.

Downloads

Performance curves & Specifications Material Dimensions Application reports

Model	Colour code curve	Bore mm	Motor output kW	Rated current A	Head max. m	Capacity max. l/min	Dry weight kg w/o cable	Max. solid handling ø mm	Pressure resistance max. m	Cable length m
LH23.0W	1 print LH23.0W_1.pdf	50	3,0	6,5	39,0	600	46,0	6	25	20
LH33.0	2 print LH33.0_1.pdf	80	3,0	6,5	18,0	1000	42,0	6	25	20
LH25.5W	3 print LH25.5W_1.pdf	50	5,5	11,0	65,0	490	80,0	6	30	20
LH311W	4 print LH311W_1.pdf	80	11,0	22,0	81,0	700	130,0	8,5	30	20
LH322W	5 print LH322W_1.pdf	80	22,0	39,0	102,0	940	304,0	8,5	30	20
LH430W	6 print LH430W_1.pdf	100	30,0	53,0	123,0	940	324,0	8,5	30	20
LH4110W	7 print LH4110W_1.pdf	100	110,0	209,0	216,0	2000	1270,0	8,0	30	20

ø Discharge bore mm			50, 80, 100
Pumping Fluid	Temperature		0-40°C
Pumping Fluid	Type of Fluid		Spring water, Rain water, Ground water, Sand carrying water
Pump	Compo- nents	Impeller	Closed type impeller
		Shaft Seal	Double mechanical seal
		Bearings	Shielded ball bearings
	Material	Impeller	Chromium iron casting
		Shaft Seal	Silicon carbide in oil bath
		Casing	Grey iron casting EN-GJL-200, Ductile iron casting EN-GJS-450-10
Motor	Type, Poles		Induction motor, 2 poles, IP68
	Lubrication		Turbine oil (ISO VG32)
	Motor Protector (built-in)		Circle thermal cut-out, Miniature protector
	Insulation		Insulation class F, Insulation class B
	Phase / Voltage		3-phase / 400V / 50Hz / d.o.l., 3-phase / 400V / 50Hz / s.d.
	Material	Casing	Grey iron casting EN-GJL-200
		Shaft	Stainless steel EN-X30Cr13
		Cable	Rubber, NSSHÖU
Discharge Connection			Threaded flange, JIS 20K Flange

Dimensions in mm:

LH23.0W
LH33.0
LH25.5W
LH311W
LH322W
LH430W
LH4110W

W1: lowest running water level

Model	d	B	D	D1	W1
LH23.0W	50	591	185	-	150
LH33.0	80	591	185	-	150
LH25.5W	50	750	240	-	170
LH311W	80	1030	270	-	200
LH322W	80	1234	330	-	300
LH430W	100	1375	330	-	300
LH4110W	100	1825	616	592	380

In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website www.tsurumi.eu/english/applications.htm.

B462 extension, Gaggenau, Germany

Construction of an underpass to connect to the Rotherma Roundabout

NSN Stone Works, Mühlacker, Germany

Rainwater disposal in ballast works

AZS ARGE Zugangsstollen, Linthal, Switzerland

Access shafts II - Kraftwerk Linth-Limmern AG - "Project Linthal 2015"

ARGE Tunnel Wienerwald, Austria

Construction of a new railway between Vienna and St. Pölten

ARGE tunnel Grouft, Luxemburg

Construction of a road tunnel with a total length of 3.000m

ICE railway track Airport Cologne-Bonn

Underground railway track for linking Cologne-Bonn airport

Pumped Storage Power Station, Vianden, Luxemburg

Extension of the pumped storage power station at Vianden with an 11th machine, Lot 1 – Structural installations, Luxemburg

Max Aicher Recycling Meitingen steelworks, Augsburg

Recycling water is needed to cool the residual slag. The mud-laden water must be pumped by high-pressure drainage pumps through a sprinkler system over the still-hot slag. The sprinkler system requires a pressure of about 3 to 4 bar.