Direkt zum Inhalt | Direkt zur Navigation
You are here:

Storm Flood Gate Maeslantkering, Netherlands

The project:


Operating the ballast tank of the storm flood gate Maeslantkering


Executing companies:

Distrimex Pompen & Service b.v., Netherlands

Van der Ende Pompen b.v., Netherlands


The Maeslantkering, a storm flood gate, is located at Hook of Holland (Netherlands). This gate closes off the inland-directed waterways when there is a threat of a storm surge. The gigantic gates are the size of a seven-storey high-rise building.


The problem:


To close the gates, the ballast tanks are flooded. To open these gates the ballast tanks have to be pumped out again.

The prolonged dry run is particularly demanding for the pumps because the gates are only closed a few times per year.


Our solution:


Thirty KTZ type pumps were installed for this purpose. These KTZ pumps also remove the last remaining silt from the tanks.

In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. With regards to the above application wear and tear can take place mainly in impeller, agitator, suction plate, shaft sleeve, oil ring, mechanical seal, pump casing, strainer, motor casing and discharge coupling. Depending on the working conditions the lifetime of those parts might vary significantly and can be shorter than the legal warranty period.
In this regard, please pay attention to our general terms and conditions that we also send to you by mail on request.