Heavy duty sand pump - a special steel impeller and suction plate have greatly increased the pump's life. The casing is designed to have wide passing area, thorough thickness and anti-abrasion material
GSD | 3-phase / 50Hz
Downloads
| Model | Colour code curve | Bore mm | Motor output kW | Rated current A | Head max. m | Capacity max. l/min | Dry weight kg w/o cable | Max. solid handling ø mm | Pressure resistance max. m | Cable length m |
|---|---|---|---|---|---|---|---|---|---|---|
| GSD-55-4 |
1
|
250 | 55,0 | 123,0 | 38,0 | 9000 | 1215 | 25 | 20 | 20 |
| ø Discharge bore mm | 250mm | |||
|---|---|---|---|---|
| Pumping Fluid | Type of Fluid | Sludge, Slurry, Liquids containing sandy mud and/or bentonite | ||
| Temperature | 0-40°C | |||
| Pump | Compo- nents | Impeller | Open type impeller | |
| Shaft Seal | Double mechanical seal | |||
| Bearings | Shielded ball bearings | |||
| Material | Impeller | Chromium iron casting | ||
| Casing | Grey iron casting EN-GJL-200 | |||
| Suction Plate | Chromium iron casting | |||
| Shaft Seal | Silicon carbide in oil bath | |||
| Motor | Insulation | Insulation class F | ||
| Lubrication | Turbine oil (ISO VG32) | |||
| Motor Protector (built-in) | Miniature protector | |||
| Type, Poles | Induction motor, 4 poles, IP68 | |||
| Phase / Voltage | 3-phase / 400V / 50Hz / s.d. | |||
| Material | Casing | Grey iron casting EN-GJL-150 | ||
| Shaft | Stainless steel EN-X30Cr13 | |||
| Cable | Rubber, NSSHÖU | |||
| Discharge Connection | Hose coupling | |||
Dimensions in mm:
-
-
- GSD-55-4
W1: lowest running water level
| Model | A | A1 | B | D | H | W1 |
|---|---|---|---|---|---|---|
| GSD-55-4 | 1050 | 850 | 655 | 708 | 1927 | 510 |
In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website
www.tsurumi.eu/english/applications.htm.
