Direkt zum Inhalt | Direkt zur Navigation
Вие сте тук:

July 2021

New Ram guard makes pumps safer

Dewatering pumps

The pump manufacturer Tsurumi now offers an impact cover that protects the build-in water level sensor even in the event of massive force.

The installation is very simple: loosen the two screws of the sensor, put on the protective cover and fasten the screws. From now on, the sensor is protected from external damage. After all, impact destruction is always possible, even with careful handling or during unattended pump operation.

The sensor on Tsurumi pumps, e.g. on the KTVE and KTZE series, comes by no means unprotected: Its flexible rubber bend absorbs shocks quite effectively - but only to a certain extent. In order to guarantee protection even in the event of violent impact, Tsurumi has developed the conical ram protection cover made of solid sheet steel. This practically rules out mechanical damage to the sensor, according to the manufacturer.

Sensor pumps are popular because they allow the device to control itself: if the water rises to a certain level, the unit starts up - and switches off again when the level drops. This also saves operating costs. The ram protection safeguards this function.

By the way, unlike other suppliers, Tsurumi relies on electrodes to measure the water level. This approach is potentially much more fail-safe because it does not require mechanics. Electrodes also react faster and are usually more accurate.

Of course, every measuring instrument is vulnerable. In this respect, the recommendation to pump operators is to install the low-cost ram protection. The manufacturer has not yet stated whether this cover will become standard for new pumps. More information can be found at Tsurumi.eu or on YouTube, where an installation video is available.

Definitely recommended: Retrofittable ram protection for the level sensor of wastewater pumps (Photo: Tsurumi)
За допълнителна информация, моля, свържете се с:
Биргер Шмид, Маркетинг
Tsurumi (Europe) GmbH
Wahlerstr. 10
40472 Дюселдорф
Германия
Тел: +49 211 417 9373
Факс: +49 211 479 1429
Имейл: sales@tsurumi.eu

Tsurumi е един от най-опитните производители на помпи в света. От модерната си фабрика в Киото, Цуруми произвежда повече потопяеми помпи в света на година от всеки друг производител на помпи. Понастоящем има над 1800 различни модела помпи в гамата на Цуруми, включително полу-vortex, vortex, незапушващи се, режещи, контракторни и обезводняващи, за канализационни и отпадни води, аератори и вентилатори, декантиращи агрегати и скимери. Tsurumi работи в световен мащаб с широка дилърска мрежа в Европа, Северна и Южна Америка, Азия, Австралия и части от Африка.
www.tsurumi.eu