Direkt zum Inhalt | Direkt zur Navigation
You are here:

KTZE | 3-phase / 50Hz

Generally applicable high grade pump that can be used efficiently in draining in civil engineering.
Maximum water depth 25m.
Incorporating on the job requirements in the initial product design, Tsurumi has built a
powerful new series of pumps to match the demands of tough drainage jobs.

Performance curves

Kurve_U.jpg

Specifications

ModelColour code curveBore mmMotor output kWRated current AHead max. mCapacity max. l/minDry weight kg w/o cableMax. solid handling ø mmPressure resistance max. mCable length m
KTZE21.5 50 1,5 3,5 21,5 430 40,0 8,5 25 20
KTZE31.5 80 1,5 3,5 14,4 670 39,0 8,5 25 20
KTZE22.2 50 2,2 5,0 26,0 500 42,0 8,5 25 20
KTZE32.2 80 2,2 5,0 20,4 800 41,0 8,5 25 20
KTZE23.7 50 3,7 7,7 36,5 450 71,0 8,5 25 20
KTZE33.7 80 3,7 7,7 29,0 900 71,0 8,5 25 20
KTZE43.7 100 3,7 7,7 18,0 1440 71,0 8,5 25 20

Material

ø Discharge bore mm 50, 80, 100
Pumping Fluid Temperature 0-40°C
Type of Fluid Spring water, Rain water, Ground water, Sand carrying water
Pump Compo- nents Impeller Semi-open type impeller
Shaft Seal Double mechanical seal
Bearings Shielded ball bearings
Material Impeller Chromium iron casting
Casing Grey iron casting EN-GJL-200
Suction Plate Ductile iron casting EN-GJS-500-7
Shaft Seal Silicon carbide in oil bath
Motor Type, Poles Induction motor, 2 poles, IP68
Lubrication Turbine oil (ISO VG32)
Motor Protector (built-in) Circle thermal cut-out
Insulation Insulation class F
Phase / Voltage 3-phase / 400V / 50Hz / d.o.l.
Material Casing Grey iron casting EN-GJL-200
Shaft Stainless steel EN-X30Cr13
Cable Rubber, NSSHÖU
Discharge Connection Threaded flange/Hose coupling

Dimensions in mm:

  • KTZE21.5
  • KTZE22.2
  • KTZE23.7
  • KTZE31.5
  • KTZE32.2
  • KTZE33.7
  • KTZE43.7

W1: lowest running water level
ModelAA1BDHW1
KTZE21.5261235609216728345
KTZE31.5268235609216728345
KTZE22.2261235629216748355
KTZE32.2268235629216748355
KTZE23.7338283747252717435
KTZE33.7353283757252717435
KTZE43.7368283767252717435


In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website www.tsurumi.eu/english/applications.htm.

Application reports